DAIWA

At the heart of the re-design is the brand new Monocoque body. A single piece body capable of holding much larger internal gearing components is machined from high-strength aluminium to provide unheralded strength and improved sealing. Housed within the MQ body, is a brand-new drive gear, providing gear strength more than double that of its predecessor. Diameter has increased 12% against 15 Saltiga, whilst the new G1 Drive Gear is also thicker with a newly designed Tough Digigear concept of larger and deeper cut teeth. 

The new MQ body in itself improves upon 15 Saltiga again. The single-piece construction improves the rigidity of the body assembly. Which when used under heavy loads against the ocean’s toughest predators, means 20 Saltiga delivers ultimate strength. The new MQ body also boasts a new rear cover design, eliminating screws from the underside of the reel to improve against intrusion, the cover is also produced from reinforced ABS to eliminate potential electrolysis with the aluminium body. Improved paint & finishing processes also extend the durability to the cosmetic side, delivering much improved corrosion protection.

The improvements just keep on coming, with a brand-new aluminium Air Rotor delivering more than double the rigidity against 15 Saltiga. The change to an aluminium construction rotor, which comes with increased weight, was enabled by clever engineering of the newly designed shape keeping the weight increase to a minimum.

Improvements have also been made to the spool & drag assembly, where drag pressures have been increased to an astounding 25/30kg. Limited by the spool capacity, Daiwa engineers created a new drag stack, increasing the number of washers to deliver ten times the drag durability compared to 15 Saltiga. A newly designed aluminium Radiation Drag Knob delivers improved cooling & heat dissipation compared to 15 Saltiga thanks to its aluminium construction and increased size compared to 14 Expedition. A newly designed ABS Longcast lip design offers improved casting performance and enhanced line management. A noticeable lack of porting and a unique under-side lip in the spool design is another deliberate strategy to minimise water intrusion under the spool.

Dark in looks and unmatched in style and swagger the 2018 Ryoga baitcaster sets a new standard in baitcaster power, performance and precision.

Integrating many of Daiwa's most famous technologies the Ryoga once again takes baitcaster design to the next level with a host of advanced and precision focused new features standing this reel out from the pack when it comes to heavy-duty baitcaster excellence.

Daiwa's Hyper Mesh gear system, Magseal, Magforce Z, Speed Shaft, and the legendary ATD (Automatic Tournament Drag) lead the charge when it comes to features, while a G1 Duraluminium spool, Zero Adjuster, and Swept Handle further enhances the reel's cutting edge performance and control.

An ultra strong, alloy frame and side plates is the foundation of the Ryoga and provides an immoveable platform for this stunning reel, regardless of what's thrown at it. Solid and assured in the angler's hand the Ryoga has few peers when it comes to palm-ability for a larger, barrel profiled baitcaster.

Continuing its trend for innovation the Ryoga features Magseal technology, a design evolution that delivered unrivaled protection since introduced into the Daiwa spin reel line-up in 2010. Located on the pinion gear in the main gear side plate, Magseal prevents water and salt intrusion into the reel to significantly increase reel protection and performance. Slamming the door shut on unwanted intruders Magseal technology is baitcaster protection and design advancement like you've never before.

Ryoga's High Mesh gear system delivers a level of gear smoothness and strength like we've never seen before with its oversized, precision cut, multi teethed gears ensuring ultimate cranking smoothness, refinement and strength.

Cranking power and balance is further enhanced with a 90mm Swept Handle bringing the balance point of the handle closer to the centre of the reel and when combined with the new High Grip I Shape knobs provides unmatched cranking power, balance and control.

Giving you the power to seize the moment is Daiwa's innovative ATD drag system. Powerful and unyielding ATD gives you the power to take control of whatever crosses your angling path. A new large clicking machined aluminium star drag puts this control in easy reach, with its super light, ergonomic design making it easier than ever to crank the power up when needed.

The Ryoga's Zero Adjuster allows for effortless, trouble-free cast control setting, while the Speed Shaft free floating spool, G1 Duraluminium spool, and legendary Magforce Z cast control system delivers trouble free, effortless casting performance, regardless of the wind or the size of the lure being used.

Flawless in design, stunning in looks and style, and unparalleled in performance and power, the new Ryoga is the most revered heavy duty baitcaster Daiwa has ever produced and the ultimate big bait reel. Feel Alive, feel Ryoga.

A new name for electric reel fans, LEOBRITZ opens a new realm of opportunities for anglers Australia wide. A family of smaller size electric reels, LEOBRITZ are small enough to hold comfortably whilst fishing, being able to enjoy the fight of the fish with the added assistance of the electric reel is a great feature for those who can’t fish with a regular conventional reel.

LEOBRITZ reels feature Daiwa’s BRITZ motor concept, a powerful brushed motor which delivers instant power when engaged. BRITZ motors are robust and offer high torque, so even with such small electric reels can deliver surprising amounts of winding power & strength.

Both LEOBRITZ models have programmable jigging functions, able to retrieve metal jigs in a series of pre-programmed patterns with the angler’s choice of retrieval speed.

Available in 300 & 500 sizes in right-hand retrieve, LEOBRITZ can be paired up with any of your favourite Daiwa overhead jigging rods or the specifically designed TANACOM or SEAPOWER for handheld electric fishing.

A baitcaster reel developed for long-casting performance with braided lines, HRF PE Special combines a special PE tuned Magforce Z cast control system with Daiwa’s famous TWS system for unparalleled casting performance.

No one-trick pony, the new HRF PE SPECIAL is equal parts strong as it is refined, with a heavy-duty brass drive gear making this reel fit for purpose in Australia’s north. A high-speed PE tuned level wind is specifically made to lay lighter braided line evenly, avoiding line dig and preventing untimely breakoffs.

A waterproof ATD carbon 3-layer drag dishes out 5.5kg of consistent smooth max drag performance. Fitted with a rubber gasket adorning the top of the stack, ATD eliminates water intrusion into the drag and significantly improves drag durability.

A newly designed 150 size Duralumin spool is equipped into a compact 100 size frame, maximising line capacity without increasing size and weight.

Overall HRF PE Special is the ultimate high-speed baitcaster for saltwater conditions, made specifically to perform with PE lines. HRF is fast and ready for action.

Daiwa’s BG series has changed the game of what affordable quality looks like in heavy-duty spinning reels. Now, by combining Monocoque Body (MQ) technology with the mass market appeal of BG, 20 BG MQ is born.

Monocoque Body (MQ) is the single biggest revolution in spinning reel design from Daiwa by totally eliminating the traditional two-piece body construction. MQ reels don’t use any side plates and feature a completely screwless body design which eliminates potential entry points for water & grime, and significantly enhances overall body strength and rigidity. 

The screwless design principle of MQ bodies are also significantly more compact than a standard body design. Screws need material to grip to, and that means more overall size and more mass in traditional body designs. By replacing the side plate with a machined aluminium engine plate which screws directly into the reel body, MQ reels can maximise the internal space made available by using larger size drive gears than before.

Throughout the entire line-up of BG MQ, vast improvements have been made to almost all areas of the reel design. The drag has been improved both in maximum capacity but also in smooth overall performance, drastically reducing the friction of the Carbon ATD drag - BG MQ’s drag performance is unmatched by the competition.

The MQ body construction not only has the obvious benefits of a stronger & more compact body design, it also delivers an increase in gear durability thanks to absolute zero movement of drivetrain components once installed inside an MQ body. Weather-sealing is also significantly improved, with seals visible in multiple locations throughout the reel, BG MQ is built for the harshest of environments.

Casting performance has also been improved with the implementation of Long Cast ABS (LC-ABS) spool design. LC-ABS spool design improves line flow from the spool, resulting in increased casting distances across the board with both heavy & light lines.

Throughout the BG MQ range, improvements have been made specific to the size of each reel to maximise their performance and overall appeal to each target market.

Small size BG MQ (2500-4000) feature dramatically larger sized drive gears. Middle sized models 5000 & 6000 now feature the Rigid Air Rotor design, maximising strength and appeal for mid-weight sportfishing applications. Larger size BG MQ from 8000-20000 receive huge benefits as a result of the MQ body, with the leg & main body drastically increased in strength without increasing weight.

BG MQ marks a new era in affordable saltwater spinning reels from Daiwa, with MQ technology now available to the masses. BG MQ is built for the harshest conditions and is set to once again revolutionise the industry. Available from 2500-20000 size, BG MQ is now aligned with 20 SALTIGA sizing.

Saltiga DURASENSOR X8 braided line is a 8-weave braided line, made in Japan using the latest DAIWA technology to produce a silky smooth, super thin line which is perfect for a host of fishing scenarios in Australia. Featuring DAIWA's MUSCLE PE fibres for a higher abrasion resistance and more durability, Saltiga DURASENSOR X8 is a very tough braided line, despite its very thin diameter. MUSCLE PE fibres are up to 4x more abrasion resistant than normal braided lines.

Combining with MUSCLE PE is the inclusion of DAIWA's famous Si2+ silicon coating. Not all braided line coatings are created equal, and Si2+ is the latest iteration of the technology which impregnates the individual fibres rather than coating them, for a long-lasting finish which aids in hydrophobicity and line management.

Saltiga DURASENSOR has been tweaked and perfected for the Australian market, with lighter weight offerings in the distinct chartreuse color with the addition of dark green markings every 10m with light blue markings every 15m to aid in bite detection on slack line techniques. These lighter weight sizes from PE #0.6-#2.0 are available in 200m spools and are the perfect size to either topshot 2 smaller spinning reels or to completely fill a standard depth Daiwa spin reel with the full 200m.

In the larger sizes, Saltiga DURASENSOR X8 is available with traditional multi-colour marking and in larger 300m spools, perfect for chasing harder fighting fish where you need larger capacity reels which hold a full spool of 300m of their given size.

Meticulously designed, unwavering in strength, and unmatched in performance and longevity Certate has always been synonymous with innovation and the new Certate LT heralds a new dawn and a new era, where Certate is Next Strong. The Certate LT combines Daiwa’s most advanced technologies and designs to deliver anglers a reel with few peers. Made in Japan, the foundation of the new Certate is its aluminium Monocoque body.

A Monocoque body eliminates the need for a side plate and allows a more rigid body to be made and larger gears to be used for improved winding power and torque. The Certate LT’s forged machine-cut Tough Digigear is 2mm larger in diameter than its closest competitor. Combining the benefits of our MQ Monocoque body, and new gear design, 19 Certate is more durable, smoother & more powerful than all others. 19 Certate’s Monocoque body is our most advanced, lightest and strongest body we’ve ever developed for a Certate.

Strength is one thing, but smoothness of a fishing reel is often the easiest feature to feel and 19 Certate again raises the bar in this realm. Rotation efficiency is up 15%, creating an effortless feel when retrieving. This increase in efficiency is thanks to three main parts. A super-rigid stainless steel main shaft, MQ Monocoque body and the precision cut forged aluminium Tough Digigear.

Classic in looks, yet modern and advanced in technology and design the new Certate LT continues the famous reel’s rich history for evolution and excellence. Technology to feel, and refinement that’s sublime, the new Certate LT is Next Strong.

Combining additional features like Long Cast ABS spool, Mag Seal, ATD drag, one-piece Air Bail, new Drag Knob, Perfect Line Stopper, Machined Aluminium Air Handle, and Air Rotor combining to make the new Certate LT our most advanced Certate ever.

The Daiwa 19 Certate LT Ark range of spinning reels now come equipped with a large ball knob which makes for an aesthetically pleasing and comfortable reel to use. The Certate LT Ark has a power handle designed for those who want extra cranking power to make use of the high drag rating and strength of the Certate LT MQ Monocoque body and machine-cut Tough Digigear. 

ong-standing Catalina, Certate SW shares it’s Monocoque (MQ) body with the famous 20 Saltiga. The single-piece body removes the requirement of a traditional side plate and screw system, replacing that with an engine plate that houses the incredibly large G1 Duralumin drive gear, also shared with the 20 Saltiga. This body & gear combination was what put 20 Saltiga on the map and is sure to set Certate SW right at the top of the tree when it comes to strength and power.

Equipped with Daiwa’s ZAION rotor design, Certate SW is lightweight and strong. ZAION’s lightweight construction makes the rotation of Certate SW incredibly light & responsive and also delivers an end result of up to 40 grams of weight saving when compared to 20 SALTIGA.

Certate SW comes equipped with a Magseal line roller and Magseal body, which combined with the MQ construction means that Certate SW is supremely well sealed to the elements, giving anglers the confidence that Certate SW will not let them down.

Sharing the same redesigned drag as 20 SALTIGA, Certate SW’s multi-layer carbon drag delivers ten times increased drag durability compared to 16 Catalina. The new washer design combined with the aluminium radiation drag knob increases heat dissipation improving drag performance under heavy load. 

High-speed models come equipped with a soft-touch hi-grip egg-shaped knob which delivers grip and comfort for the sweeping motions of working a surface lure. Slow speed models have an EVA Power Round Knob suitable for the up & down working of vertical jigs. 

 “TOUGH & TECHNICAL” to pioneer a new era in SW fishing scene.

Mega Torque Motor - The strength of Seaborg's new custom motor is in the same class as the mighty Marine Power 3000. The power and speed are quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminium composite housing is designed to maximise the release of heat and keep the motor cool, ensuring that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.

Megatwin - Daiwa's original Seaborg Megatwin reel design utilises a two-gear ratio system. The new Seaborg employs a totally redesigned system that allows the user to immediately switch between mega-power mode and mega-speed mode by simply touching a button. During retrieve or when battling a monster the new speed function switches smoothly and effortlessly. With this functionality, an angler can alternate to the best speed, depending on the situation.

ATD (Automatic Drag System) - ATD gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest, yet becomes more viscous immediately after drag startup. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of fish.

To keep the drag smooth under extreme pressure , an aluminium drag radiator is located on the handle shaft that dissipates heat away from the drag system, maximising the release of heat, keeping the drag cooler for better drag performance. This ultimate function will maintain the drag power to help conquer large fish. Also, an alarm sound function will notify anglers when line is being pulled out.

Jog Power Lever - The new Seaborg Jog Power Lever system is designed for standup fishing techniques. With the standing fight concept in mind, the Jog Lever will allow an immediate response to wind the line. When standing with the rod/reel outfit in your right hand the lever can be controlled with your left thumb. Alternatively when using your left hand to hold the outfit, pinching the lever with your right hand will allow you to control the machine easily. This easy to use function will allow you to continuously lead the fight against your target.

Magsealed Ball Bearing - Daiwa's ultimate technology - Magsealed Ball Bearing prevents water and dust intrusion inside the ball bearing which greatly reduces reel corrosion and noise. Applied to the spool shaft surrounding, a place where salt and dust intrusion is most likely to happen and maintenance is difficult. This will improve the long-term durability and the smoothness.

Dot Screen Display - Out in the field it can be tough to read anything on an LCD screen due to sun glare or sunglasses. The Seaborg's LCD screen displays large letters/numbers and uses a dotted LCD screen to make it easier for anglers to see the display. Line input procedures are selectable in Japanese or English languages. Just let the D-Vec letters on the start screen lead you to the exciting world of Dendoh reel fishing.

The 800MJ is designed as the ultimate standup electric game reel, its smaller compact size combined with its immense power allows anglers to place enormous pressure on fish without applying the hurt on the angler. The new motor allows the angler to pump the rod while the motor does all the work, combined with the ATD drag system and just about anything that swims can be subdued in a fraction of time compared to conventional reels and by anglers that simply don't have the physical strength of others.

For ultimate deep water the 1200MJ is the ideal choice. Its massive line capacity combined with sheer power is ideal for fishing the deepest waters of the ocean.

The Seaborg reels set a new standard for what is possible with an electric reel. Gone are the days when this type of reel was made just for deep drop fishing. With the new Jog Lever design, the Seaborg is the ultimate standup electric game reel.

Features:

• Powerful Megatwin (switchable between high/low gear
• English version LCD
• Magsealed ball Bearing
• Oversize SIC line guide
• Jog Power Lever
• Drag radiator
• Convenient 12-Volt DC Operation (acceptable range of voltage 12-16.8V)
• Electric current usage No load - 4 amps, Rated 7/5A (Hi/Lo) amps, Maximum power - 20 amps for 800-1200MJ - 25 amps for 500MJ 
• Line Counter and Depth Memory
• LCD Readout